Collection: Speedflow 200 Series Straight AN Hose Ends

Browse black Speedflow 201 Series straight AN hose ends from the 200 Series fitting range. These aluminium fittings are listed for use with Speedflow 200 Series PTFE braided hose, with a straight outlet for direct hose routing.

Listed AN sizes

• -3 AN: 201-03-BLK
• -4 AN: 201-04-BLK
• -6 AN: 201-06-BLK
• -8 AN: 201-08-BLK
• -10 AN: 201-10-BLK
• -12 AN: 201-12-BLK

Match the PTFE hose series

The listed fittings feature aluminium construction and a black hard-anodised finish. Match both the AN connection size and the specified Speedflow 200 Series hose. A matching dash size or stainless braid alone does not establish compatibility with another hose construction or brand.

Check the individual part's assembly requirements and use the correct components specified by Speedflow. Do not substitute a 100 Series cutter-style hose end for a 200 Series PTFE fitting based on size alone.

Check routing and operating requirements

Choose a straight hose end where the hose can leave the connection directly. Allow clearance and follow the hose manufacturer's minimum bend radius.

Confirm the complete hose and fitting assembly is suitable for the intended fluid, working pressure and temperature. Do not assume suitability for brake, clutch or other hydraulic systems without explicit manufacturer confirmation for the exact assembly. Follow Speedflow's assembly and installation instructions.