{"title":"Speedflow Plugs, Caps, Bulkhead Nuts \u0026 Washers","description":"\u003ch2\u003eSpeedflow Plugs, Caps, Bulkhead Nuts \u0026amp; Washers - Complete Your AN Plumbing System\u003c\/h2\u003e\n\u003cp\u003eFinish your custom fuel, oil, and coolant systems with our comprehensive range of Speedflow plugs, caps, bulkhead nuts, and sealing washers. These essential components allow you to seal unused ports, create clean bulkhead pass-throughs, and ensure leak-free connections throughout your AN plumbing system.\u003c\/p\u003e\n\u003ch3\u003eProduct Range:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAN Plugs (Male):\u003c\/strong\u003e Seal unused female AN ports on manifolds, fuel rails, oil pans, and fittings. Available in all AN sizes from -3 to -20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAN Caps (Female):\u003c\/strong\u003e Cover unused male AN fittings and hose ends. Prevents contamination and provides clean appearance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Plugs (ORB \u0026amp; NPT):\u003c\/strong\u003e Seal O-ring boss and NPT threaded ports on engine blocks, oil pans, and custom fabrications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulkhead Nuts:\u003c\/strong\u003e Secure bulkhead fittings through firewalls, panels, and tanks. Includes jam nuts and lock nuts for vibration resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Washers:\u003c\/strong\u003e Aluminium and copper crush washers for proper sealing on banjo bolts, port plugs, and bulkhead installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Tips:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAN Plugs:\u003c\/strong\u003e Use a light coating of thread sealant or PTFE tape on tapered NPT threads. AN straight threads use O-rings or washers for sealing—never use thread sealant on straight AN threads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBulkhead Nuts:\u003c\/strong\u003e Tighten bulkhead nuts evenly to prevent distortion of panels. Use proper sealing washers on both sides of the bulkhead for leak-free installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCrush Washers:\u003c\/strong\u003e Always replace aluminium and copper crush washers—they're designed for one-time use and won't seal properly if reused.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAustralian Stock:\u003c\/strong\u003e Complete range of Speedflow plugs, caps, and hardware in stock. Fast shipping from Perth, Western Australia.\u003c\/p\u003e","products":[{"product_id":"924-03-s-3-steel-bulkhead-nut","title":"924-03-S -3 bulkhead nut - steel","description":"\u003cp\u003eSF924-03-S\u003c\/p\u003e\n\u003cp\u003e-3 bulkhead nut \u003c\/p\u003e\n\u003cp\u003eSpeedflow manufacture steel bulkhead nuts in -3 to suit our steel bulkheads. \u003c\/p\u003e\n\u003cp\u003eThese are machined from quality steel and nickel plated for a beautiful finish.\u003c\/p\u003e\n\u003cp\u003e-3 are now manufactured from Stainless Steel.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":37687790043330,"sku":"SF924-03-SS","price":3.85,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/924-S__80375.jpg?v=1768804442"},{"product_id":"814-06-blk-6-in-hex-o-ring-port-plug","title":"814-06-BLK -6AN Internal Hex O-Ring Port Plug","description":"\u003ch3\u003eSpeedflow 814-06-BLK | -6AN Internal Hex O-Ring Port Plug\u003c\/h3\u003e\u003cp\u003eSeal off unused -6AN O-ring boss (ORB) ports with this precision-machined internal hex port plug from Speedflow. Featuring a captive O-ring for a reliable, leak-free seal, this plug is the clean and professional way to blank off unused fittings on fuel systems, oil systems, and hydraulic components.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e-6AN O-ring boss (ORB) port plug\u003c\/li\u003e\n\u003cli\u003eInternal hex design for a flush, low-profile finish\u003c\/li\u003e\n\u003cli\u003eCaptive O-ring for a reliable, leak-free seal\u003c\/li\u003e\n\u003cli\u003ePrecision-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eBlack anodised finish for corrosion resistance and a clean look\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIdeal Applications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBlanking off unused ports on fuel rails, regulators, and filters\u003c\/li\u003e\n\u003cli\u003eSealing spare ports on oil filter sandwich plates and cooler adapters\u003c\/li\u003e\n\u003cli\u003eHydraulic and pneumatic system port blanking\u003c\/li\u003e\n\u003cli\u003eDry sump and wet sump oil system unused outlets\u003c\/li\u003e\n\u003cli\u003eStreet, race, and project builds — Holden V8, Ford, Chev Small Block, LS, and more\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart Number: 814-06-BLK\u003cbr\u003eSKU: SF814-06-BLK\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":37783590731970,"sku":"SF814-06-BLK","price":11.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0002861_o-ring-plug_450_fe47c82d-904e-4507-b7d3-48711eef5eed.jpg?v=1750048184"},{"product_id":"814-08-blk-8-in-hex-o-ring-port-plug","title":"814-08-BLK  -8 in hex o-ring port plug","description":"\u003ch2\u003eSpeedflow 814-08-BLK | -8 Hex O-Ring Port Plug — Black Anodised\u003c\/h2\u003e\u003cp\u003eSeal unused AN ports cleanly and permanently with the Speedflow 814-08-BLK — a precision-machined -8 hex o-ring port plug engineered for high-performance automotive, motorsport, and hydraulic applications. Whether you're blanking off an unused inlet on an oil cooler, dry-sump tank, or remote filter housing, this plug delivers a leak-free seal you can trust under pressure.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 814-08-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision CNC machined\u003c\/strong\u003e from high-grade aluminium for consistent thread engagement and a reliable o-ring seal every time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised finish\u003c\/strong\u003e resists corrosion, heat, and fluid exposure — looks great and lasts longer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-8 AN \/ ORB (O-Ring Boss) thread\u003c\/strong\u003e fits standard -8 ORB ports found on most performance oil, fuel, and coolant system components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex drive design\u003c\/strong\u003e allows easy installation and removal with a standard spanner or socket — no special tools required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight at just 9g\u003c\/strong\u003e — every gram counts in a race build\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes o-ring\u003c\/strong\u003e for an immediate, positive seal without additional hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eOil coolers, dry-sump tanks, remote oil filter housings, fuel surge tanks, power steering reservoirs, and any performance component with unused -8 ORB ports.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF814-08-BLK\u003c\/li\u003e\n\u003cli\u003eThread Size: -8 AN \/ ORB (O-Ring Boss)\u003c\/li\u003e\n\u003cli\u003eDrive Type: Hex\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003cli\u003eWeight: 9g\u003c\/li\u003e\n\u003cli\u003eSeal Type: O-Ring (included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":37783633952962,"sku":"SF814-08-BLK","price":13.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0002861_o-ring-plug_450_7bcfd9f7-c453-4db0-b1b1-513bc258c410.jpg?v=1750048230"},{"product_id":"814-10-blk-10-in-hex-o-ring-port-plug","title":"814-10-BLK -10 in hex o-ring port plug","description":"\u003cp\u003e\u003cstrong\u003eSpeedflow SF814-10-BLK -10AN Hex O-Ring Port Plug\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHigh-quality black anodized hex port plug designed for reliable sealing in performance hydraulic and fuel systems. The -10AN size features precision-machined threads and an integrated o-ring groove for leak-free operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e-10AN hex o-ring port plug\u003c\/li\u003e\n\u003cli\u003eBlack anodized finish for corrosion resistance\u003c\/li\u003e\n\u003cli\u003ePrecision-machined for perfect fitment\u003c\/li\u003e\n\u003cli\u003eO-ring groove ensures leak-free sealing\u003c\/li\u003e\n\u003cli\u003eIdeal for blocking unused ports in manifolds, pumps, and fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e SF814-10-BLK\u003c\/p\u003e\n\u003cp\u003ePerfect for race cars, performance street vehicles, and custom hydraulic applications where quality and reliability matter.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":37783669604546,"sku":"SF814-10-BLK","price":17.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0002861_o-ring-plug_450_25e2738b-fbe2-4b18-8adc-49567221cbe7.jpg?v=1750048298"},{"product_id":"819-03-3-tube-sleeve","title":"819-03-BLK -3 Tube Sleeve | Black Anodised","description":"\u003ch2\u003eSpeedflow 819-03-BLK | -3 Tube Sleeve — Black Anodised\u003c\/h2\u003e\u003cp\u003eThe Speedflow 819-03-BLK is the matching tube sleeve for the SF818-03-BLK -3 AN tube nut, completing the compression-style hard line adapter system. Used together, the tube sleeve and tube nut convert steel or aluminium hard line tubing to standard -3 AN fittings — no welding or brazing required. Simply flare your tubing to 37°, slide the sleeve over the tube, and secure with the matching tube nut for a clean, leak-free hard line connection.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 819-03-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression tube sleeve\u003c\/strong\u003e — works in conjunction with the SF818-03-BLK tube nut to create a complete AN hard line adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e37° JIC\/AN flare compatible\u003c\/strong\u003e — designed for use with tubing flared to the standard 37° AN flare angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised aluminium\u003c\/strong\u003e — corrosion and fluid resistant with a clean, professional finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-3 AN sizing\u003c\/strong\u003e — suits the smallest AN hard line size, commonly used for brake and hydraulic clutch lines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltralight at just 1g\u003c\/strong\u003e — negligible weight impact for brake and clutch line applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity needed for your build\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eBrake hard line fabrication, hydraulic clutch line connections, and any -3 AN hard line plumbing circuit requiring a compression tube sleeve.\u003c\/p\u003e\u003ch3\u003eImportant Note\u003c\/h3\u003e\u003cp\u003eMust be used with the matching SF818-03-BLK -3 AN tube nut and a 37° flaring tool. The tube must be flared before fitting the sleeve and nut. Sleeve is not compatible with braided hose — for hard line use only.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF819-03-BLK\u003c\/li\u003e\n\u003cli\u003eAN Size: -3 AN\u003c\/li\u003e\n\u003cli\u003eType: Compression Tube Sleeve\u003c\/li\u003e\n\u003cli\u003eFlare Angle: 37° JIC\/AN\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003cli\u003eWeight: 1g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":38072364040386,"sku":"SF819-03-BLK","price":2.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/sfl-sf81903blk_ml.jpg?v=1748316671"},{"product_id":"818-03-blk","title":"818-03-BLK -3 Tube Nut | Black Anodised","description":"\u003ch2\u003eSpeedflow 818-03-BLK | -3 Tube Nut — Black Anodised\u003c\/h2\u003e\u003cp\u003eConvert your steel or aluminium hard line tubing to AN fittings cleanly and professionally with the Speedflow 818-03-BLK — a -3 AN compression-style tube nut designed to work with a matching tube sleeve. Simply flare your tubing with a 37° flaring tool, slide on the sleeve, and thread the tube nut onto any standard -3 AN female fitting for a secure, leak-free hard line connection. An essential component for brake line, fuel line, and hydraulic clutch hard line fabrication in motorsport and performance automotive builds.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 818-03-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression-style tube nut\u003c\/strong\u003e — converts steel or aluminium hard line tubing to -3 AN fittings without welding or brazing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e37° JIC\/AN flare compatible\u003c\/strong\u003e — requires tubing to be flared with a standard 37° flaring tool for a positive, leak-free seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised aluminium\u003c\/strong\u003e — corrosion and fluid resistant; looks clean and professional in any build\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-3 AN thread\u003c\/strong\u003e — mates with all standard -3 AN female fittings and adapters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltralight at just 1g\u003c\/strong\u003e — minimal weight impact for brake and clutch line applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity needed for your build\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eBrake hard line fabrication, hydraulic clutch line connections, fuel hard line conversions, and any -3 AN hard line plumbing circuit requiring a compression tube nut.\u003c\/p\u003e\u003ch3\u003eImportant Note\u003c\/h3\u003e\u003cp\u003eA matching Speedflow tube sleeve and a 37° flaring tool are required for correct installation. The tube must be flared before fitting the sleeve and nut.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF818-03-BLK\u003c\/li\u003e\n\u003cli\u003eAN Size: -3 AN\u003c\/li\u003e\n\u003cli\u003eType: Compression Tube Nut\u003c\/li\u003e\n\u003cli\u003eFlare Angle: 37° JIC\/AN\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003cli\u003eWeight: 1g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":38072426102978,"sku":"SF818-03-BLK","price":3.85,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0002825_aluminium-tube-nuts.jpg?v=1776305218"},{"product_id":"901-02-x-aluminium-washer-8mm-each","title":"901-02 Aluminium washer -8mm (EACH)","description":"\u003ch2\u003eSpeedflow 901-02 | 8mm Aluminium Sealing Washer — Sold Individually\u003c\/h2\u003e\u003cp\u003eA small but essential component for any performance plumbing build — the Speedflow 901-02 is a precision-made 8mm aluminium sealing washer designed for use with banjo bolts, drain plugs, and port fittings across motorsport and performance automotive applications. Soft aluminium construction allows the washer to compress and conform to mating surfaces, creating a reliable, leak-free seal without the need for thread sealant or PTFE tape.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 901-02?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft aluminium construction\u003c\/strong\u003e — compresses to conform to mating surfaces for a positive, leak-free seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8mm internal diameter\u003c\/strong\u003e — suits M8 banjo bolts, drain plugs, and port fittings commonly found on engines, gearboxes, and oil systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sealant required\u003c\/strong\u003e — aluminium crush washers seal on compression alone, keeping your build clean and professional\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-use design\u003c\/strong\u003e — should be replaced each time the fitting is removed to ensure a fresh, reliable seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltralight at just 1g\u003c\/strong\u003e — negligible weight for a critical sealing component\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity needed for your build or service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eM8 banjo bolt seals on brake callipers, clutch master cylinders, and fuel system banjo fittings; oil drain plug seals; engine and gearbox port sealing; and any application requiring an 8mm aluminium crush washer.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF901-02-X\u003c\/li\u003e\n\u003cli\u003eInternal Diameter: 8mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium\u003c\/li\u003e\n\u003cli\u003eType: Sealing \/ Crush Washer\u003c\/li\u003e\n\u003cli\u003eWeight: 1g\u003c\/li\u003e\n\u003cli\u003eSold: Individually (each)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":38209674608834,"sku":"SF901-02-X","price":1.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0003105_aluminium-crush-washers_450.jpg?v=1750119653"},{"product_id":"901-03-x-aluminium-washer-3-8-10-mm-each","title":"901-03 Aluminium washer 3\/8\"-10 MM (EACH)","description":"\u003ch2\u003eSpeedflow 901-03 | 10mm (3\/8\") Aluminium Sealing Washer — Sold Individually\u003c\/h2\u003e\u003cp\u003eThe Speedflow 901-03 is a precision-made 10mm (3\/8\") aluminium sealing washer — an essential consumable for any motorsport or performance automotive build running banjo bolt fittings, drain plugs, or ported components with 3\/8\" \/ M10 fasteners. Soft aluminium construction allows the washer to compress and conform to mating surfaces on tightening, creating a clean, reliable, leak-free seal without thread sealant or PTFE tape.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 901-03?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft aluminium construction\u003c\/strong\u003e — compresses to conform to mating surfaces for a positive, leak-free crush seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10mm (3\/8\") internal diameter\u003c\/strong\u003e — suits M10 \/ 3\/8\" banjo bolts, drain plugs, and port fittings commonly found on engines, gearboxes, brake systems, and oil circuits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sealant required\u003c\/strong\u003e — aluminium crush washers seal on compression alone for a clean, professional result\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-use design\u003c\/strong\u003e — should be replaced each time the fitting is removed to ensure a fresh, reliable seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltralight at just 1g\u003c\/strong\u003e — negligible weight for a critical sealing component\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity needed for your build or service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eM10 \/ 3\/8\" banjo bolt seals on brake callipers, clutch master cylinders, fuel system banjo fittings, oil drain plugs, turbocharger oil feed banjos, and any application requiring a 10mm aluminium crush washer.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF901-03\u003c\/li\u003e\n\u003cli\u003eInternal Diameter: 10mm (3\/8\")\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium\u003c\/li\u003e\n\u003cli\u003eType: Sealing \/ Crush Washer\u003c\/li\u003e\n\u003cli\u003eWeight: 1g\u003c\/li\u003e\n\u003cli\u003eSold: Individually (each)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":38209836286146,"sku":"SF901-03","price":1.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0003105_aluminium-crush-washers_450_28c0806a-bb12-40e6-9c43-a5738817dbfa.jpg?v=1750119775"},{"product_id":"901-04-aluminium-washer-7-16-each","title":"901-04 Aluminium washer 7\/16\" - 11mm (EACH)","description":"\u003ch2\u003eSpeedflow 901-04 | 7\/16\" (11mm) Aluminium Sealing Washer — Sold Individually\u003c\/h2\u003e\u003cp\u003eThe Speedflow 901-04 is a precision-made 7\/16\" (11mm) aluminium sealing washer — a critical consumable for motorsport and performance automotive builds running banjo bolt fittings, brake system components, and ported hardware with 7\/16\" fasteners. The 7\/16\" size is one of the most commonly used banjo bolt sizes in brake and clutch systems, making this washer an essential stock item for any serious workshop or race build. Soft aluminium construction compresses on tightening to create a clean, reliable, leak-free seal without thread sealant or PTFE tape.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 901-04?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft aluminium construction\u003c\/strong\u003e — compresses to conform to mating surfaces for a positive, leak-free crush seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7\/16\" (11mm) internal diameter\u003c\/strong\u003e — suits 7\/16\" banjo bolts commonly found on brake callipers, master cylinders, and clutch systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sealant required\u003c\/strong\u003e — aluminium crush washers seal on compression alone for a clean, professional result\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-use design\u003c\/strong\u003e — should be replaced each time the fitting is removed to ensure a fresh, reliable seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltralight at just 1g\u003c\/strong\u003e — negligible weight for a critical sealing component\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity needed for your build or service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003e7\/16\" banjo bolt seals on brake callipers, brake master cylinders, clutch master and slave cylinders, fuel system banjo fittings, and any application requiring a 7\/16\" (11mm) aluminium crush washer.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF901-04-X\u003c\/li\u003e\n\u003cli\u003eInternal Diameter: 7\/16\" (11mm)\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium\u003c\/li\u003e\n\u003cli\u003eType: Sealing \/ Crush Washer\u003c\/li\u003e\n\u003cli\u003eWeight: 1g\u003c\/li\u003e\n\u003cli\u003eSold: Individually (each)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":38209944322242,"sku":"SF901-04-X","price":1.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0003105_aluminium-crush-washers_450_d07767b2-0d96-4b56-94fc-020c4cde60c7.jpg?v=1750119839"},{"product_id":"901-05-aluminium-washer-1-2-12mm-each","title":"901-05 Aluminium washer 1\/2\"-12mm (EACH)","description":"\u003ch2\u003eSpeedflow 901-05 | 1\/2\" (12mm) Aluminium Sealing Washer — Sold Individually\u003c\/h2\u003e\u003cp\u003eThe Speedflow 901-05 is a precision-made 1\/2\" (12mm) aluminium sealing washer — an essential consumable for motorsport and performance automotive builds running banjo bolt fittings, drain plugs, and ported components with 1\/2\" \/ M12 fasteners. Soft aluminium construction compresses on tightening to conform to mating surfaces, creating a clean, reliable, leak-free seal without thread sealant or PTFE tape. The 1\/2\" \/ 12mm size is widely used across oil, fuel, and cooling system drain and banjo bolt applications.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 901-05?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft aluminium construction\u003c\/strong\u003e — compresses to conform to mating surfaces for a positive, leak-free crush seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/2\" (12mm) internal diameter\u003c\/strong\u003e — suits 1\/2\" \/ M12 banjo bolts, drain plugs, and port fittings on engines, gearboxes, and oil systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sealant required\u003c\/strong\u003e — aluminium crush washers seal on compression alone for a clean, professional result\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-use design\u003c\/strong\u003e — should be replaced each time the fitting is removed to ensure a fresh, reliable seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltralight at just 1g\u003c\/strong\u003e — negligible weight for a critical sealing component\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity needed for your build or service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003e1\/2\" \/ M12 banjo bolt seals on fuel system components, oil drain plugs, engine and gearbox port sealing, turbocharger oil feed and drain banjos, and any application requiring a 1\/2\" (12mm) aluminium crush washer.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF901-05\u003c\/li\u003e\n\u003cli\u003eInternal Diameter: 1\/2\" (12mm)\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium\u003c\/li\u003e\n\u003cli\u003eType: Sealing \/ Crush Washer\u003c\/li\u003e\n\u003cli\u003eWeight: 1g\u003c\/li\u003e\n\u003cli\u003eSold: Individually (each)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":38209972109506,"sku":"SF901-05","price":1.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0003105_aluminium-crush-washers_450_004eb66f-cb21-4adf-bca5-b3cc194eed11.jpg?v=1750120113"},{"product_id":"901-06-aluminium-washer9-16-14mm-each","title":"901-06 Aluminium washer 9\/16\"-14mm (EACH)","description":"\u003ch2\u003eSpeedflow 901-06 | 9\/16\" (14mm) Aluminium Sealing Washer — Sold Individually\u003c\/h2\u003e\u003cp\u003eThe Speedflow 901-06 is a precision-made 9\/16\" (14mm) aluminium sealing washer — an essential consumable for motorsport and performance automotive builds running banjo bolt fittings, drain plugs, and ported components with 9\/16\" \/ M14 fasteners. Soft aluminium construction compresses on tightening to conform to mating surfaces, creating a clean, reliable, leak-free seal without thread sealant or PTFE tape. The 9\/16\" \/ 14mm size is commonly found across oil system drain plugs, larger banjo bolt applications, and engine porting on performance and motorsport engines.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 901-06?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft aluminium construction\u003c\/strong\u003e — compresses to conform to mating surfaces for a positive, leak-free crush seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9\/16\" (14mm) internal diameter\u003c\/strong\u003e — suits 9\/16\" \/ M14 banjo bolts, drain plugs, and port fittings on engines, gearboxes, and oil systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sealant required\u003c\/strong\u003e — aluminium crush washers seal on compression alone for a clean, professional result\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-use design\u003c\/strong\u003e — should be replaced each time the fitting is removed to ensure a fresh, reliable seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltralight at just 1g\u003c\/strong\u003e — negligible weight for a critical sealing component\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity needed for your build or service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003e9\/16\" \/ M14 banjo bolt seals on oil system components, engine and gearbox drain plugs, larger fuel system banjo fittings, and any application requiring a 9\/16\" (14mm) aluminium crush washer.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF901-06\u003c\/li\u003e\n\u003cli\u003eInternal Diameter: 9\/16\" (14mm)\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium\u003c\/li\u003e\n\u003cli\u003eType: Sealing \/ Crush Washer\u003c\/li\u003e\n\u003cli\u003eWeight: 1g\u003c\/li\u003e\n\u003cli\u003eSold: Individually (each)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":38209984954562,"sku":"SF901-06","price":1.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0003105_aluminium-crush-washers_450_004eb66f-cb21-4adf-bca5-b3cc194eed11.jpg?v=1750120113"},{"product_id":"901-08-alininium-washer-18mm-each","title":"901-08 Aluminium washer 18mm (EACH)","description":"\u003ch2\u003eSpeedflow 901-08 | 18mm Aluminium Sealing Washer — Sold Individually\u003c\/h2\u003e\u003cp\u003eThe Speedflow 901-08 is a precision-made 18mm aluminium sealing washer — an essential consumable for motorsport and performance automotive builds running larger banjo bolt fittings, drain plugs, and ported components with M18 fasteners. Soft aluminium construction compresses on tightening to conform to mating surfaces, creating a clean, reliable, leak-free seal without thread sealant or PTFE tape. The 18mm size is commonly found on larger oil system drain plugs, sump plugs, and high-flow banjo bolt applications in performance and motorsport engines.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 901-08?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft aluminium construction\u003c\/strong\u003e — compresses to conform to mating surfaces for a positive, leak-free crush seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18mm internal diameter\u003c\/strong\u003e — suits M18 banjo bolts, sump drain plugs, and larger port fittings on engines and gearboxes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sealant required\u003c\/strong\u003e — aluminium crush washers seal on compression alone for a clean, professional result\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-use design\u003c\/strong\u003e — should be replaced each time the fitting is removed to ensure a fresh, reliable seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltralight at just 1g\u003c\/strong\u003e — negligible weight for a critical sealing component\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity needed for your build or service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eM18 sump drain plug seals, larger oil system banjo bolt applications, engine and gearbox port sealing, and any application requiring an 18mm aluminium crush washer.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF901-08\u003c\/li\u003e\n\u003cli\u003eInternal Diameter: 18mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium\u003c\/li\u003e\n\u003cli\u003eType: Sealing \/ Crush Washer\u003c\/li\u003e\n\u003cli\u003eWeight: 1g\u003c\/li\u003e\n\u003cli\u003eSold: Individually (each)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":38209998717122,"sku":"SF901-08","price":1.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0003105_aluminium-crush-washers_450_004eb66f-cb21-4adf-bca5-b3cc194eed11.jpg?v=1750120113"},{"product_id":"901-10-aluminium-washer-22mm-each","title":"901-10 Aluminium washer 22mm (EACH)","description":"\u003ch2\u003eSpeedflow 901-10 | 22mm Aluminium Sealing Washer — Sold Individually\u003c\/h2\u003e\u003cp\u003eThe Speedflow 901-10 is a precision-made 22mm aluminium sealing washer — one of the larger sizes in the Speedflow washer range, designed for motorsport and performance automotive builds running large-bore banjo bolt fittings, sump drain plugs, and ported components with M22 fasteners. Soft aluminium construction compresses on tightening to conform to mating surfaces, creating a clean, reliable, leak-free seal without thread sealant or PTFE tape. The 22mm size is commonly found on larger sump plugs, high-flow oil system banjo bolts, and transmission drain applications.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 901-10?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft aluminium construction\u003c\/strong\u003e — compresses to conform to mating surfaces for a positive, leak-free crush seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e22mm internal diameter\u003c\/strong\u003e — suits M22 banjo bolts, large sump drain plugs, and high-flow port fittings on engines and transmissions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sealant required\u003c\/strong\u003e — aluminium crush washers seal on compression alone for a clean, professional result\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-use design\u003c\/strong\u003e — should be replaced each time the fitting is removed to ensure a fresh, reliable seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltralight at just 1g\u003c\/strong\u003e — negligible weight for a critical sealing component\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity needed for your build or service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eM22 sump drain plug seals, large-bore oil system banjo bolt applications, transmission and gearbox drain plug sealing, and any application requiring a 22mm aluminium crush washer.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF901-10-X\u003c\/li\u003e\n\u003cli\u003eInternal Diameter: 22mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium\u003c\/li\u003e\n\u003cli\u003eType: Sealing \/ Crush Washer\u003c\/li\u003e\n\u003cli\u003eWeight: 1g\u003c\/li\u003e\n\u003cli\u003eSold: Individually (each)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":38210015199426,"sku":"SF901-10-X","price":1.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0003105_aluminium-crush-washers_450_004eb66f-cb21-4adf-bca5-b3cc194eed11.jpg?v=1750120113"},{"product_id":"818-08-blk-8-tube-nut","title":"818-08-BLK -8 Tube Nut | Black Anodised","description":"\u003ch2\u003eSpeedflow 818-08-BLK | -8 Tube Nut — Black Anodised\u003c\/h2\u003e\u003cp\u003eStep up to a larger bore hard line connection with the Speedflow 818-08-BLK — a -8 AN compression-style tube nut designed to convert steel or aluminium hard line tubing to standard -8 AN fittings. The -8 AN size is a popular choice for higher-flow fuel, oil, and coolant hard line circuits in motorsport and performance automotive builds. Flare your tubing to 37°, fit the matching sleeve, and thread onto any standard -8 AN female fitting for a clean, professional, leak-free connection — no welding or brazing required.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 818-08-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression-style tube nut\u003c\/strong\u003e — converts steel or aluminium hard line tubing to -8 AN fittings quickly and cleanly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e37° JIC\/AN flare compatible\u003c\/strong\u003e — requires tubing to be flared with a standard 37° flaring tool for a positive, leak-free seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised aluminium\u003c\/strong\u003e — corrosion and fluid resistant with a clean, professional finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-8 AN thread\u003c\/strong\u003e — mates with all standard -8 AN female fittings, adapters, and bulkheads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher-flow -8 AN bore\u003c\/strong\u003e — suited to fuel, oil, and coolant hard line circuits that demand greater flow capacity than -6 AN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight at just 12g\u003c\/strong\u003e — minimal weight impact for race and performance builds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity needed for your build\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eHigh-flow fuel hard line fabrication, oil feed and return hard lines, coolant circuit hard lines, power steering hard lines, and any -8 AN hard line plumbing circuit requiring a compression tube nut.\u003c\/p\u003e\u003ch3\u003eImportant Note\u003c\/h3\u003e\u003cp\u003eA matching Speedflow tube sleeve and a 37° flaring tool are required for correct installation. The tube must be flared before fitting the sleeve and nut.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF818-08-BLK\u003c\/li\u003e\n\u003cli\u003eAN Size: -8 AN\u003c\/li\u003e\n\u003cli\u003eType: Compression Tube Nut\u003c\/li\u003e\n\u003cli\u003eFlare Angle: 37° JIC\/AN\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003cli\u003eWeight: 12g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":38278464176322,"sku":"SF818-08-BLK","price":7.75,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/sfl-sf81803blk_ll_ml.jpg?v=1748317428"},{"product_id":"819-08-blk-8-tube-sleeve","title":"819-08-BLK -8 Tube Sleeve | Black Anodised","description":"\u003ch2\u003eSpeedflow 819-08-BLK | -8 Tube Sleeve — Black Anodised\u003c\/h2\u003e\u003cp\u003eThe Speedflow 819-08-BLK is the matching tube sleeve for the SF818-08-BLK -8 AN tube nut, completing the compression-style hard line adapter system for -8 AN plumbing. The -8 AN size is a popular choice for higher-flow fuel, oil, and coolant hard line circuits in motorsport and performance automotive builds. Flare your tubing to 37°, slide the sleeve over the tube end, and secure with the matching tube nut for a clean, professional, leak-free hard line connection — no welding or brazing required.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 819-08-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression tube sleeve\u003c\/strong\u003e — works in conjunction with the SF818-08-BLK tube nut to create a complete -8 AN hard line adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e37° JIC\/AN flare compatible\u003c\/strong\u003e — designed for use with tubing flared to the standard 37° AN flare angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised aluminium\u003c\/strong\u003e — corrosion and fluid resistant with a clean, professional finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-8 AN sizing\u003c\/strong\u003e — higher-flow bore suited to fuel, oil, and coolant hard line circuits that demand greater capacity than -6 AN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight at just 1g\u003c\/strong\u003e — negligible weight impact for race and performance builds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity needed for your build\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eHigh-flow fuel hard line fabrication, oil feed and return hard lines, coolant circuit hard lines, power steering hard lines, and any -8 AN hard line plumbing circuit requiring a compression tube sleeve.\u003c\/p\u003e\u003ch3\u003eImportant Note\u003c\/h3\u003e\u003cp\u003eMust be used with the matching SF818-08-BLK -8 AN tube nut and a 37° flaring tool. The tube must be flared before fitting the sleeve and nut. Sleeve is for hard line use only — not compatible with braided hose.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF819-08-BLK\u003c\/li\u003e\n\u003cli\u003eAN Size: -8 AN\u003c\/li\u003e\n\u003cli\u003eType: Compression Tube Sleeve\u003c\/li\u003e\n\u003cli\u003eFlare Angle: 37° JIC\/AN\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003cli\u003eWeight: 1g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":38278747652290,"sku":"SF819-08-BLK","price":3.85,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/sfl-sf81903blk_ml_717b0307-ab3c-4c7e-9690-d32555b4302a.jpg?v=1748316862"},{"product_id":"932-08-blk-1-2npt-in-hex-plug","title":"932-08-BLK 1\/2 NPT in hex plug","description":"\u003cp\u003eSF932-08-BLK\u003c\/p\u003e\n\u003cp\u003espeedflow 932-08-blk\u003c\/p\u003e\n\u003cp\u003e1\/2 in hex plug\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":39341287669954,"sku":"SF932-08-BLK","price":10.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0002868_npt-plug.jpg?v=1744859067"},{"product_id":"932-06-blk-3-8-npt-in-hex-plug","title":"932-06-BLK 3\/8 NPT  in hex plug","description":"\u003cp\u003eSF932-06-BLK\u003c\/p\u003e\n\u003cp\u003espeedflow 932-06-blk\u003c\/p\u003e\n\u003cp\u003e3\/8 npt in hex plug\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":39341678461122,"sku":"SF932-06-BLK","price":8.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0002868_npt-plug_450_5b7ecf6a-ffdf-461d-a14b-6ae16dcb8f3b.jpg?v=1750126163"},{"product_id":"932-04-blk-1-4-npt-in-hex-plug","title":"932-04-BLK 1\/4 NPT  in hex plug","description":"\u003cp\u003eSF932-04-BLK\u003c\/p\u003e\n\u003cp\u003espeedflow 932-04-blk\u003c\/p\u003e\n\u003cp\u003e1\/4 npt in hex plug\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":39341711720642,"sku":"SF932-04-BLK","price":7.75,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0002868_npt-plug_51dbfa84-1f31-4591-962a-df26a107ba66.jpg?v=1744859185"},{"product_id":"932-02-blk-1-8-npt-in-hex-plug","title":"932-02-BLK 1\/8 NPT  in hex plug","description":"\u003cp\u003eSF932-02-BLK\u003c\/p\u003e\n\u003cp\u003espeedflow 932-02-blk\u003c\/p\u003e\n\u003cp\u003e1\/8 npt in hex plug\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":39341792559298,"sku":"SF932-02-BLK","price":5.85,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0002868_npt-plug_36b1356e-f6a9-4493-ac3c-b2865f10f700.jpg?v=1744859131"},{"product_id":"932-12-blk-3-4npt-in-hex-plug-black","title":"932-12-BLK 3\/4 NPT in hex plug","description":"\u003cp\u003eSF932-12-BLK\u003c\/p\u003e\n\u003cp\u003espeedflow 932-12-blk\u003c\/p\u003e\n\u003cp\u003e3\/4 npt in hex plug - black\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":39823951462594,"sku":"SF932-12-BLK","price":13.55,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/products\/SF932-BLK.jpg?v=1633571546"},{"product_id":"814-12-blk-12-in-hex-o-ring-port-plug","title":"814-12-BLK -12 in hex o-ring port plug","description":"\u003ch2\u003eSpeedflow 814-12-BLK | -12 Hex O-Ring Port Plug — Black Anodised\u003c\/h2\u003e\u003cp\u003eBlock off unused -12 AN ports with confidence using the Speedflow 814-12-BLK — a heavy-duty hex o-ring port plug precision machined for motorsport, performance automotive, and hydraulic system builds. Designed for the larger -12 ORB port size, this plug is the go-to solution when blanking high-flow inlets on oil tanks, coolers, and reservoirs where a reliable, leak-free seal is non-negotiable.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 814-12-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision CNC machined aluminium\u003c\/strong\u003e — consistent thread form and tight tolerances for a positive, repeatable seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised finish\u003c\/strong\u003e — corrosion, heat, and fluid resistant; purpose-built for the engine bay environment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-12 AN \/ ORB (O-Ring Boss) thread\u003c\/strong\u003e — fits standard -12 ORB ports on oil coolers, dry-sump tanks, surge tanks, and remote filter housings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex drive\u003c\/strong\u003e — install and remove with a standard spanner or socket; no special tooling needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-ring included\u003c\/strong\u003e — ready to fit straight out of the packet with an immediate positive seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarger port coverage\u003c\/strong\u003e — ideal where high-volume flow paths need to be cleanly capped during a build or system reconfiguration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eDry-sump oil tanks, remote oil filter housings, large-capacity oil coolers, fuel surge tanks, power steering reservoirs, and any performance component with unused -12 ORB ports.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF814-12-BLK\u003c\/li\u003e\n\u003cli\u003eThread Size: -12 AN \/ ORB (O-Ring Boss)\u003c\/li\u003e\n\u003cli\u003eDrive Type: Hex\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003cli\u003eSeal Type: O-Ring (included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":39851436572866,"sku":"SF814-12-BLK","price":23.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/products\/sfl-sf81403blk.jpg?v=1633588766"},{"product_id":"924-08-blk-8-bulkhead-nut","title":"924-08-BLK - 8 bulkhead nut","description":"\u003cp\u003eBulkhead Nuts\u003c\/p\u003e\n\u003cp\u003eWe offer a full range of bulkhead nuts designed to securely fasten bulkhead fittings to firewalls, panels, fuel cells, floor panels, or any other solid material.\u003c\/p\u003e\n\u003cp\u003eBulkheads are used to pass hoses through various surfaces, providing a secure seal and a professional finish when paired with bulkhead nuts, washers, and the appropriate hose ends. Our 924 Bulkhead Nuts can be used in conjunction with our 903 Washers to ensure a tight, reliable connection.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":40044690800834,"sku":"SF924-08-BLK","price":5.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/sfl-sf92408blk_ml.jpg?v=1748318072"},{"product_id":"820-04-blk-4-flare-cap","title":"820-04-BLK -4 flare cap","description":"\u003ch2\u003eSpeedflow 820-04-BLK | -4 AN Flare Cap — Black Anodised\u003c\/h2\u003e\u003cp\u003eCap off unused or temporary -4 AN male flare fittings cleanly and securely with the Speedflow 820-04-BLK. This precision-machined female flare cap threads directly onto any standard -4 AN male flare fitting, sealing the port during builds, pressure testing, storage, or system reconfiguration. An essential workshop and build accessory for any motorsport or performance automotive plumbing setup running -4 AN fittings.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 820-04-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision CNC machined aluminium\u003c\/strong\u003e — consistent 37° JIC\/AN internal flare seating for a positive, leak-free cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised finish\u003c\/strong\u003e — corrosion, heat, and fluid resistant; protects open fittings from contamination and damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-4 AN female flare thread\u003c\/strong\u003e — caps any standard -4 AN male flare fitting or hose end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for pressure testing\u003c\/strong\u003e — seal off circuit ends during system pressure checks without permanent plugging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild and storage protection\u003c\/strong\u003e — keeps open fittings clean and protected during fabrication, transport, and storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight construction\u003c\/strong\u003e — minimal weight impact for race and performance builds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eCapping unused -4 AN male flare fittings, sealing circuits during pressure testing, protecting open fittings during build and storage, and temporary port sealing during system reconfiguration.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF820-04-BLK\u003c\/li\u003e\n\u003cli\u003eThread: -4 AN Female Flare (37° JIC)\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003cli\u003eType: AN Flare Cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":40191323504834,"sku":"SF820-04-BLK","price":5.85,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/products\/820__68092.1533188901.486.486.jpg?v=1776306565"},{"product_id":"820-08-blk-8-flare-cap","title":"820-08-BLK -8 flare cap","description":"\u003ch2\u003eSpeedflow 820-08-BLK | -8 AN Flare Cap — Black Anodised\u003c\/h2\u003e\u003cp\u003eSeal unused or temporary -8 AN male flare fittings cleanly and securely with the Speedflow 820-08-BLK. This precision-machined female flare cap threads directly onto any standard -8 AN male flare fitting, providing a leak-free seal during builds, pressure testing, storage, or system reconfiguration. The -8 AN size is widely used across oil, fuel, and coolant circuits in motorsport and performance automotive builds, making this cap an essential item to have on hand in any serious workshop or build environment.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 820-08-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision CNC machined aluminium\u003c\/strong\u003e — consistent 37° JIC\/AN internal flare seating for a positive, leak-free cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised finish\u003c\/strong\u003e — corrosion, heat, and fluid resistant; protects open fittings from contamination and damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-8 AN female flare thread\u003c\/strong\u003e — caps any standard -8 AN male flare fitting or hose end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for pressure testing\u003c\/strong\u003e — seal off -8 AN circuit ends during system pressure checks without permanent plugging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild and storage protection\u003c\/strong\u003e — keeps open fittings clean and protected during fabrication, transport, and storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher-flow -8 AN sizing\u003c\/strong\u003e — suits the larger bore fittings used on oil, fuel, and coolant circuits that demand greater flow capacity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eCapping unused -8 AN male flare fittings on oil feed and return circuits, fuel systems, coolant lines, and power steering plumbing; sealing circuits during pressure testing; protecting open fittings during build and storage; and temporary port sealing during system reconfiguration.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF820-08-BLK\u003c\/li\u003e\n\u003cli\u003eThread: -8 AN Female Flare (37° JIC)\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003cli\u003eType: AN Flare Cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":40191359320258,"sku":"SF820-08-BLK","price":9.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/products\/820__68092.1533188901.486.486_e95def19-0846-41a6-9446-c23b230f978c.jpg?v=1776306781"},{"product_id":"820-10-blk-10-flare-cap","title":"820-10-BLK -10 flare cap","description":"\u003ch2\u003eSpeedflow 820-10-BLK | -10 AN Flare Cap — Black Anodised\u003c\/h2\u003e\u003cp\u003eSeal large-bore -10 AN male flare fittings cleanly and securely with the Speedflow 820-10-BLK. This precision-machined female flare cap threads directly onto any standard -10 AN male flare fitting, providing a reliable leak-free seal during builds, pressure testing, storage, or system reconfiguration. The -10 AN size is commonly used on high-flow oil, fuel, and coolant circuits in serious motorsport and performance automotive builds — including dry-sump systems and high-capacity fuel delivery — making this cap an essential item for any workshop running large-bore AN plumbing.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 820-10-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision CNC machined aluminium\u003c\/strong\u003e — consistent 37° JIC\/AN internal flare seating for a positive, leak-free cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised finish\u003c\/strong\u003e — corrosion, heat, and fluid resistant; protects open fittings from contamination and damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-10 AN female flare thread\u003c\/strong\u003e — caps any standard -10 AN male flare fitting or hose end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for pressure testing\u003c\/strong\u003e — seal off large-bore -10 AN circuit ends during system pressure checks without permanent plugging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild and storage protection\u003c\/strong\u003e — keeps open large-bore fittings clean and protected during fabrication, transport, and storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge-bore -10 AN sizing\u003c\/strong\u003e — suits the high-flow fittings used on dry-sump oil systems, high-capacity fuel delivery, and large coolant circuits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eCapping unused -10 AN male flare fittings on dry-sump oil systems, high-capacity fuel delivery lines, large-bore coolant circuits, and transmission cooler plumbing; sealing circuits during pressure testing; and protecting open fittings during build and storage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF820-10-BLK\u003c\/li\u003e\n\u003cli\u003eThread: -10 AN Female Flare (37° JIC)\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003cli\u003eType: AN Flare Cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":40191394087106,"sku":"SF820-10-BLK","price":11.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/products\/820__68092.1533188901.486.486_fc3311ad-073a-45df-825a-b64eb0d15e3b.jpg?v=1776306853"},{"product_id":"820-06-blk-6-flare-cap","title":"820-06-BLK -6 flare cap","description":"\u003ch2\u003eSpeedflow 820-06-BLK | -6 AN Flare Cap — Black Anodised\u003c\/h2\u003e\u003cp\u003eCap off unused or temporary -6 AN male flare fittings cleanly and securely with the Speedflow 820-06-BLK. This precision-machined female flare cap threads directly onto any standard -6 AN male flare fitting, sealing the port during builds, pressure testing, storage, or system reconfiguration. One of the most commonly needed cap sizes in performance automotive plumbing, the -6 AN flare cap is an essential workshop and build accessory for any motorsport or performance build running -6 AN fittings.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 820-06-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision CNC machined aluminium\u003c\/strong\u003e — consistent 37° JIC\/AN internal flare seating for a positive, leak-free cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised finish\u003c\/strong\u003e — corrosion, heat, and fluid resistant; protects open fittings from contamination and damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-6 AN female flare thread\u003c\/strong\u003e — caps any standard -6 AN male flare fitting or hose end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for pressure testing\u003c\/strong\u003e — seal off circuit ends during system pressure checks without permanent plugging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild and storage protection\u003c\/strong\u003e — keeps open fittings clean and protected during fabrication, transport, and storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight construction\u003c\/strong\u003e — minimal weight impact for race and performance builds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eCapping unused -6 AN male flare fittings on fuel systems, oil circuits, coolant lines, and power steering plumbing; sealing circuits during pressure testing; protecting open fittings during build and storage; and temporary port sealing during system reconfiguration.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF820-06-BLK\u003c\/li\u003e\n\u003cli\u003eThread: -6 AN Female Flare (37° JIC)\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003cli\u003eType: AN Flare Cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":40191425020098,"sku":"SF820-06-BLK","price":7.75,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/products\/820__68092.1533188901.486.486_43f80023-ac4c-4b9b-a0a5-4f793cd34d44.jpg?v=1776306698"},{"product_id":"924-06-blk-6-bulkhead-nut","title":"924-06-BLK -6  bulkhead nut","description":"\u003cp\u003eBulkhead Nuts\u003c\/p\u003e\n\u003cp\u003eWe offer a full range of bulkhead nuts designed to securely fasten bulkhead fittings to firewalls, panels, fuel cells, floor panels, or any other solid material.\u003c\/p\u003e\n\u003cp\u003eBulkheads are used to pass hoses through various surfaces, providing a secure seal and a professional finish when paired with bulkhead nuts, washers, and the appropriate hose ends. Our 924 Bulkhead Nuts can be used in conjunction with our 903 Washers to ensure a tight, reliable connection.\u003c\/p\u003e\n\u003cp\u003eSF924-06-BLK\u003c\/p\u003e\n\u003cp\u003espeedflow 924-06-blk\u003c\/p\u003e\n\u003cp\u003e-6 bulkhead nut\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":40233817342146,"sku":"SF924-06-BLK","price":3.85,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/sfl-sf92408blk_ml_fba4ec0c-8fdc-406e-97de-1933ec327406.jpg?v=1748318136"},{"product_id":"924-04-blk-4-bulkhead-nut","title":"SF924-04-BLK Speedflow -4 Bulkhead Nut Black Anodised","description":"\u003cp\u003eBulkhead Nuts\u003c\/p\u003e\n\u003cp\u003eWe offer a full range of bulkhead nuts designed to securely fasten bulkhead fittings to firewalls, panels, fuel cells, floor panels, or any other solid material.\u003c\/p\u003e\n\u003cp\u003eBulkheads are used to pass hoses through various surfaces, providing a secure seal and a professional finish when paired with bulkhead nuts, washers, and the appropriate hose ends. Our 924 Bulkhead Nuts can be used in conjunction with our 903 Washers to ensure a tight, reliable connection.\u003c\/p\u003e\n\u003cp\u003eSF924-04-blk\u003c\/p\u003e\n\u003cp\u003e-4 bulkhead nut\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":41374685528258,"sku":"SF924-04-BLK","price":3.85,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/products\/s-l1600_33.jpg?v=1639373640"},{"product_id":"924-10-blk-10-bulkhead-nut","title":"924-10-BLK -10 bulkhead nut","description":"\u003cp\u003eBulkhead Nuts\u003c\/p\u003e\n\u003cp\u003eWe offer a full range of bulkhead nuts designed to securely fasten bulkhead fittings to firewalls, panels, fuel cells, floor panels, or any other solid material.\u003c\/p\u003e\n\u003cp\u003eBulkheads are used to pass hoses through various surfaces, providing a secure seal and a professional finish when paired with bulkhead nuts, washers, and the appropriate hose ends. Our 924 Bulkhead Nuts can be used in conjunction with our 903 Washers to ensure a tight, reliable connection.\u003c\/p\u003e\n\u003cp\u003e924-10-blk\u003c\/p\u003e\n\u003cp\u003e-10 bulkhead nut\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":41829593317570,"sku":"SF924-10-BLK","price":7.75,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/products\/sfl-sf92403blk_xl.jpg?v=1649041498"},{"product_id":"818-04-blk-4-tube-nut","title":"818-04-BLK -4 Tube Nut | Black Anodised","description":"\u003ch2\u003eSpeedflow 818-04-BLK | -4 Tube Nut — Black Anodised\u003c\/h2\u003e\u003cp\u003eConvert your steel or aluminium hard line tubing to -4 AN fittings with the Speedflow 818-04-BLK compression-style tube nut. Flare your tubing to 37°, slide on the matching sleeve, and thread onto any standard -4 AN female fitting for a clean, professional, leak-free hard line connection. A staple component for brake line, fuel hard line, and hydraulic clutch line fabrication in motorsport and performance automotive builds.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 818-04-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression-style tube nut\u003c\/strong\u003e — converts steel or aluminium hard line tubing to -4 AN fittings without welding or brazing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e37° JIC\/AN flare compatible\u003c\/strong\u003e — requires tubing to be flared with a standard 37° flaring tool for a positive, leak-free seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised aluminium\u003c\/strong\u003e — corrosion and fluid resistant with a clean, professional finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-4 AN thread\u003c\/strong\u003e — mates with all standard -4 AN female fittings, adapters, and bulkheads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight construction\u003c\/strong\u003e — minimal weight impact for brake, clutch, and fuel hard line applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity needed for your build\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eBrake hard line fabrication, hydraulic clutch line connections, fuel hard line conversions, oil hard line plumbing, and any -4 AN hard line circuit requiring a compression tube nut.\u003c\/p\u003e\u003ch3\u003eImportant Note\u003c\/h3\u003e\u003cp\u003eA matching Speedflow tube sleeve and a 37° flaring tool are required for correct installation. The tube must be flared before fitting the sleeve and nut.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF818-04-BLK\u003c\/li\u003e\n\u003cli\u003eAN Size: -4 AN\u003c\/li\u003e\n\u003cli\u003eType: Compression Tube Nut\u003c\/li\u003e\n\u003cli\u003eFlare Angle: 37° JIC\/AN\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":41841366106306,"sku":"SF818-04-BLK","price":3.85,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/products\/sfl-sf81803blk_ll_xl.jpg?v=1649226527"},{"product_id":"924-04-s-4-bulkhead-nut-steel","title":"924-04-S -4 bulkhead nut - steel","description":"\u003cp\u003eBulkhead Nuts\u003c\/p\u003e\n\u003cp\u003eWe offer a full range of bulkhead nuts designed to securely fasten bulkhead fittings to firewalls, panels, fuel cells, floor panels, or any other solid material.\u003c\/p\u003e\n\u003cp\u003eBulkheads are used to pass hoses through various surfaces, providing a secure seal and a professional finish when paired with bulkhead nuts, washers, and the appropriate hose ends. Our 924 Bulkhead Nuts can be used in conjunction with our 903 Washers to ensure a tight, reliable connection.\u003c\/p\u003e\n\u003cp\u003e924-04-s\u003c\/p\u003e\n\u003cp\u003e-4 bulkhead nut - steel\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":42356025426114,"sku":"SF924-04-S","price":5.85,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0003069_steel-bulkhead-nut_450.jpg?v=1768802886"},{"product_id":"818-06-blk-6-tube-nut","title":"818-06-BLK -6 Tube Nut | Black Anodised","description":"\u003ch2\u003eSpeedflow 818-06-BLK | -6 Tube Nut — Black Anodised\u003c\/h2\u003e\u003cp\u003eConvert your steel or aluminium hard line tubing to -6 AN fittings with the Speedflow 818-06-BLK compression-style tube nut. One of the most commonly used tube nut sizes in performance automotive plumbing, the -6 AN suits a wide range of fuel, oil, and coolant hard line applications. Flare your tubing to 37°, fit the matching sleeve, and thread onto any standard -6 AN female fitting for a clean, professional, leak-free hard line connection — no welding or brazing required.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 818-06-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression-style tube nut\u003c\/strong\u003e — converts steel or aluminium hard line tubing to -6 AN fittings quickly and cleanly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e37° JIC\/AN flare compatible\u003c\/strong\u003e — requires tubing to be flared with a standard 37° flaring tool for a positive, leak-free seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised aluminium\u003c\/strong\u003e — corrosion and fluid resistant with a clean, professional finish suited to any build aesthetic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-6 AN thread\u003c\/strong\u003e — mates with all standard -6 AN female fittings, adapters, and bulkheads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile -6 AN sizing\u003c\/strong\u003e — one of the most widely used AN sizes across fuel, oil, and coolant hard line circuits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity needed for your build\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eFuel hard line fabrication, oil feed and return hard lines, coolant circuit hard lines, power steering hard lines, and any -6 AN hard line plumbing circuit requiring a compression tube nut.\u003c\/p\u003e\u003ch3\u003eImportant Note\u003c\/h3\u003e\u003cp\u003eA matching Speedflow tube sleeve and a 37° flaring tool are required for correct installation. The tube must be flared before fitting the sleeve and nut.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF818-06-BLK\u003c\/li\u003e\n\u003cli\u003eAN Size: -6 AN\u003c\/li\u003e\n\u003cli\u003eType: Compression Tube Nut\u003c\/li\u003e\n\u003cli\u003eFlare Angle: 37° JIC\/AN\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":44192486719805,"sku":"818-06-BLK","price":5.85,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/products\/sfl-sf81803blk_ll_xl_3775d56a-1d65-47f6-bd09-41824f8d68be.jpg?v=1671072785"},{"product_id":"924-12-blk-12-bulkhead-nut","title":"924-12-BLK -12 bulkhead nut","description":"\u003cp\u003eBulkhead Nuts\u003c\/p\u003e\n\u003cp\u003eWe offer a full range of bulkhead nuts designed to securely fasten bulkhead fittings to firewalls, panels, fuel cells, floor panels, or any other solid material.\u003c\/p\u003e\n\u003cp\u003eBulkheads are used to pass hoses through various surfaces, providing a secure seal and a professional finish when paired with bulkhead nuts, washers, and the appropriate hose ends. Our 924 Bulkhead Nuts can be used in conjunction with our 903 Washers to ensure a tight, reliable connection.\u003c\/p\u003e\n\u003cp\u003e924-12-blk\u003c\/p\u003e\n\u003cp\u003e-12 bulkhead nut\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":44499981631805,"sku":"924-12-BLK","price":9.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/products\/sfl-sf92403blk_xl_a5b56832-ddef-463a-ba0f-06a483916d75.jpg?v=1675130064"},{"product_id":"820-12-blk-12-flare-cap","title":"820-12-BLK -12 flare cap","description":"\u003ch2\u003eSpeedflow 820-12-BLK | -12 AN Flare Cap — Black Anodised\u003c\/h2\u003e\u003cp\u003eCap off large-bore -12 AN male flare fittings cleanly and securely with the Speedflow 820-12-BLK. This precision-machined female flare cap threads directly onto any standard -12 AN male flare fitting, delivering a reliable leak-free seal during builds, pressure testing, storage, or system reconfiguration. The -12 AN size is one of the largest commonly used AN flare sizes in motorsport and performance automotive plumbing — found on dry-sump oil systems, high-capacity fuel delivery, transmission coolers, and large-bore coolant circuits — making this cap an essential item for any serious workshop or race build environment.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 820-12-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision CNC machined aluminium\u003c\/strong\u003e — consistent 37° JIC\/AN internal flare seating for a positive, leak-free cap on large-bore fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised finish\u003c\/strong\u003e — corrosion, heat, and fluid resistant; protects open fittings from contamination and damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-12 AN female flare thread\u003c\/strong\u003e — caps any standard -12 AN male flare fitting or hose end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for pressure testing\u003c\/strong\u003e — seal off large-bore -12 AN circuit ends during system pressure checks without permanent plugging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild and storage protection\u003c\/strong\u003e — keeps open large-bore fittings clean and protected during fabrication, transport, and storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum-flow -12 AN sizing\u003c\/strong\u003e — suits the high-volume fittings used on dry-sump systems, high-capacity fuel delivery, and large transmission cooler circuits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eCapping unused -12 AN male flare fittings on dry-sump oil systems, high-capacity fuel delivery lines, transmission and gearbox cooler plumbing, large-bore coolant circuits, and surge tank connections; sealing circuits during pressure testing; and protecting open fittings during build and storage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF820-12-BLK\u003c\/li\u003e\n\u003cli\u003eThread: -12 AN Female Flare (37° JIC)\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003cli\u003eType: AN Flare Cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":44795344453949,"sku":"SF820-12-BLK","price":15.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/products\/sfl-sf82003blk_xl.jpg?v=1776306929"},{"product_id":"819-06-blk-6-tube-sleeve","title":"819-06-BLK -6 Tube Sleeve | Black Anodised","description":"\u003ch2\u003eSpeedflow 819-06-BLK | -6 Tube Sleeve — Black Anodised\u003c\/h2\u003e\u003cp\u003eThe Speedflow 819-06-BLK is the matching tube sleeve for the SF818-06-BLK -6 AN tube nut, completing the compression-style hard line adapter system for -6 AN plumbing. One of the most widely used AN hard line sizes in performance automotive builds, the -6 AN sleeve suits a broad range of fuel, oil, and coolant hard line applications. Flare your tubing to 37°, slide the sleeve over the tube end, and secure with the matching tube nut for a clean, professional, leak-free hard line connection — no welding or brazing required.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 819-06-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression tube sleeve\u003c\/strong\u003e — works in conjunction with the SF818-06-BLK tube nut to create a complete -6 AN hard line adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e37° JIC\/AN flare compatible\u003c\/strong\u003e — designed for use with tubing flared to the standard 37° AN flare angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised aluminium\u003c\/strong\u003e — corrosion and fluid resistant with a clean, professional finish suited to any build aesthetic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-6 AN sizing\u003c\/strong\u003e — one of the most versatile and widely used AN hard line sizes across fuel, oil, coolant, and power steering applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight construction\u003c\/strong\u003e — negligible weight impact for race and performance builds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity needed for your build\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eFuel hard line fabrication, oil feed and return hard lines, coolant circuit hard lines, power steering hard lines, and any -6 AN hard line plumbing circuit requiring a compression tube sleeve.\u003c\/p\u003e\u003ch3\u003eImportant Note\u003c\/h3\u003e\u003cp\u003eMust be used with the matching SF818-06-BLK -6 AN tube nut and a 37° flaring tool. The tube must be flared before fitting the sleeve and nut. Sleeve is for hard line use only — not compatible with braided hose.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF819-06-BLK\u003c\/li\u003e\n\u003cli\u003eAN Size: -6 AN\u003c\/li\u003e\n\u003cli\u003eType: Compression Tube Sleeve\u003c\/li\u003e\n\u003cli\u003eFlare Angle: 37° JIC\/AN\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":47242931700029,"sku":"819-06-BLK","price":2.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0002826_aluminium-tube-sleeve_450.jpg?v=1776305978"},{"product_id":"819-10-blk-10-tube-sleeve","title":"819-10-BLK -10 Tube Sleeve | Black Anodised","description":"\u003ch2\u003eSpeedflow 819-10-BLK | -10 Tube Sleeve — Black Anodised\u003c\/h2\u003e\u003cp\u003eThe Speedflow 819-10-BLK is the matching tube sleeve for the SF818-10-BLK -10 AN tube nut, completing the compression-style hard line adapter system for large-bore -10 AN plumbing. The -10 AN size is purpose-built for high-volume oil, fuel, and coolant hard line circuits in serious motorsport and performance automotive builds — including dry-sump systems, high-capacity fuel delivery, and large-bore coolant circuits. Flare your tubing to 37°, slide the sleeve over the tube end, and secure with the matching tube nut for a clean, professional, leak-free hard line connection.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 819-10-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression tube sleeve\u003c\/strong\u003e — works in conjunction with the SF818-10-BLK tube nut to create a complete -10 AN hard line adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e37° JIC\/AN flare compatible\u003c\/strong\u003e — designed for use with tubing flared to the standard 37° AN flare angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised aluminium\u003c\/strong\u003e — corrosion and fluid resistant with a clean, professional finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge-bore -10 AN sizing\u003c\/strong\u003e — designed for high-volume oil, fuel, and coolant hard line circuits that demand maximum flow capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight construction\u003c\/strong\u003e — negligible weight impact despite the larger bore size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity needed for your build\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eDry-sump oil system hard lines, high-capacity fuel delivery hard lines, large-bore coolant circuit hard lines, and any -10 AN hard line plumbing circuit requiring a compression tube sleeve.\u003c\/p\u003e\u003ch3\u003eImportant Note\u003c\/h3\u003e\u003cp\u003eMust be used with the matching SF818-10-BLK -10 AN tube nut and a 37° flaring tool. The tube must be flared before fitting the sleeve and nut. Sleeve is for hard line use only — not compatible with braided hose.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF819-10-BLK\u003c\/li\u003e\n\u003cli\u003eAN Size: -10 AN\u003c\/li\u003e\n\u003cli\u003eType: Compression Tube Sleeve\u003c\/li\u003e\n\u003cli\u003eFlare Angle: 37° JIC\/AN\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":47242959978813,"sku":"819-10-BLK","price":5.85,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0002826_aluminium-tube-sleeve_450_8dce3497-c19d-481d-8d75-3158e221544c.jpg?v=1776306212"},{"product_id":"932-16-blk-1_-npt-in-hex-plug","title":"932-16-BLK  NPT in hex plug","description":"\u003cp\u003e932-16-BLK NPT in hex plug\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":47870677188925,"sku":"932-16-BLK","price":19.35,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0002868_npt-plug_450.jpg?v=1707792924"},{"product_id":"819-04-blk-4-tube-sleeve","title":"819-04-BLK -4 Tube Sleeve | Black Anodised","description":"\u003ch2\u003eSpeedflow 819-04-BLK | -4 Tube Sleeve — Black Anodised\u003c\/h2\u003e\u003cp\u003eThe Speedflow 819-04-BLK is the matching tube sleeve for the SF818-04-BLK -4 AN tube nut, completing the compression-style hard line adapter system. Together, the sleeve and tube nut convert steel or aluminium hard line tubing to standard -4 AN fittings — cleanly and without welding or brazing. Flare your tubing to 37°, slide the sleeve over the tube end, and secure with the matching tube nut for a professional, leak-free hard line connection suited to brake, fuel, oil, and clutch line applications.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 819-04-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression tube sleeve\u003c\/strong\u003e — works in conjunction with the SF818-04-BLK tube nut to create a complete -4 AN hard line adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e37° JIC\/AN flare compatible\u003c\/strong\u003e — designed for use with tubing flared to the standard 37° AN flare angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised aluminium\u003c\/strong\u003e — corrosion and fluid resistant with a clean, professional finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-4 AN sizing\u003c\/strong\u003e — one of the most commonly used AN hard line sizes across brake, fuel, oil, and hydraulic clutch applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight construction\u003c\/strong\u003e — negligible weight impact for race and performance builds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity needed for your build\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eBrake hard line fabrication, hydraulic clutch line connections, fuel hard line conversions, oil hard line plumbing, and any -4 AN hard line circuit requiring a compression tube sleeve.\u003c\/p\u003e\u003ch3\u003eImportant Note\u003c\/h3\u003e\u003cp\u003eMust be used with the matching SF818-04-BLK -4 AN tube nut and a 37° flaring tool. The tube must be flared before fitting the sleeve and nut. Sleeve is for hard line use only — not compatible with braided hose.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF819-04-BLK\u003c\/li\u003e\n\u003cli\u003eAN Size: -4 AN\u003c\/li\u003e\n\u003cli\u003eType: Compression Tube Sleeve\u003c\/li\u003e\n\u003cli\u003eFlare Angle: 37° JIC\/AN\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":48859412660541,"sku":"819-04-BLK","price":2.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0002826_aluminium-tube-sleeve_450_1.jpg?v=1776305853"},{"product_id":"814-04-blk-4-in-hex-o-ring-port-plug","title":"814-04-BLK -4AN Internal Hex O-Ring Port Plug","description":"\u003ch3\u003eSpeedflow 814-04-BLK | -4AN Internal Hex O-Ring Port Plug\u003c\/h3\u003e\u003cp\u003eSeal off unused -4AN O-ring boss (ORB) ports with this precision-machined internal hex port plug from Speedflow. Featuring a captive O-ring for a reliable, leak-free seal, this plug is the clean and professional way to blank off unused fittings on fuel systems, oil systems, and hydraulic components.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e-4AN O-ring boss (ORB) port plug\u003c\/li\u003e\n\u003cli\u003eInternal hex design for a flush, low-profile finish\u003c\/li\u003e\n\u003cli\u003eCaptive O-ring for a reliable, leak-free seal\u003c\/li\u003e\n\u003cli\u003ePrecision-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eBlack anodised finish for corrosion resistance and a clean look\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIdeal Applications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBlanking off unused ports on fuel rails, regulators, and filters\u003c\/li\u003e\n\u003cli\u003eSealing spare ports on oil filter sandwich plates and cooler adapters\u003c\/li\u003e\n\u003cli\u003eHydraulic and pneumatic system port blanking\u003c\/li\u003e\n\u003cli\u003eDry sump and wet sump oil system unused outlets\u003c\/li\u003e\n\u003cli\u003eStreet, race, and project builds — Holden V8, Ford, Chev Small Block, LS, and more\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart Number: 814-04-BLK\u003cbr\u003eSKU: 814-04-BLK\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":49383869808957,"sku":"814-04-BLK","price":11.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0002861_o-ring-plug_450.jpg?v=1726549815"},{"product_id":"814-16-blk-16-in-hex-o-ring-port-plug","title":"814-16-BLK -16 in hex  O-ring port plug","description":"\u003ch2\u003eSpeedflow 814-16-BLK | -16 Hex O-Ring Port Plug — Black Anodised\u003c\/h2\u003e\u003cp\u003eWhen you need to seal a large-bore -16 AN port cleanly and permanently, the Speedflow 814-16-BLK is the professional's choice. Precision machined from high-grade aluminium and finished in a durable black hard anodise, this hex o-ring port plug is built for the demands of serious motorsport and high-performance automotive builds — where a weeping port plug simply isn't an option.\u003c\/p\u003e\u003ch3\u003eWhy Choose the Speedflow 814-16-BLK?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision CNC machined aluminium\u003c\/strong\u003e — tight tolerances ensure consistent thread engagement and a positive o-ring seal every time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack hard anodised finish\u003c\/strong\u003e — resists heat, corrosion, and fluid exposure in even the harshest engine bay environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-16 AN \/ ORB (O-Ring Boss) thread\u003c\/strong\u003e — designed for large-bore -16 ORB ports on high-flow oil, fuel, and coolant system components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex drive\u003c\/strong\u003e — fits a standard spanner or socket for fast, tool-friendly installation and removal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-ring included\u003c\/strong\u003e — ready to install straight away with no additional hardware required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge port coverage\u003c\/strong\u003e — purpose-built for blanking high-volume flow paths on tanks, coolers, and reservoirs during builds or system changes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cp\u003eHigh-flow dry-sump oil tanks, large-capacity oil coolers, remote filter housings, fuel surge tanks, transmission coolers, power steering reservoirs, and any performance component with unused -16 ORB ports.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SF814-16-BLK\u003c\/li\u003e\n\u003cli\u003eThread Size: -16 AN \/ ORB (O-Ring Boss)\u003c\/li\u003e\n\u003cli\u003eDrive Type: Hex\u003c\/li\u003e\n\u003cli\u003eFinish: Black Hard Anodised Aluminium\u003c\/li\u003e\n\u003cli\u003eSeal Type: O-Ring (included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock held locally in Perth, WA — fast dispatch Australia-wide.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":49392131932477,"sku":"814-16-BLK","price":38.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/0002861_o-ring-plug_450_1.jpg?v=1732679125"},{"product_id":"820-03-blk-3-flare-cap","title":"820-03-BLK Speedflow -3AN Flare Cap - Black 820 Series","description":"\u003ch3\u003ePrecision Flare Cap for Sealing Unused Ports\u003c\/h3\u003e\u003cp\u003eThe Speedflow 820-03-BLK flare cap provides a secure, leak-free seal for unused -3AN female ports. CNC-machined from 6061-T6 billet aluminium with a 37-degree flare to match AN standards. Essential for capping off unused brake, fuel, or oil line ports.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061-T6 Billet Aluminium:\u003c\/strong\u003e CNC-machined from solid aluminium for exceptional strength\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e37° Flare Design:\u003c\/strong\u003e Industry-standard AN flare angle ensures proper sealing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHard Coat Anodised:\u003c\/strong\u003e Black finish resists corrosion and looks professional\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Threads:\u003c\/strong\u003e Machined to exacting tolerances for leak-free sealing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight:\u003c\/strong\u003e Minimal weight addition to your system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAustralian Made:\u003c\/strong\u003e Manufactured by Speedflow in NSW since 1983\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize: -3AN (3\/8\"-24 UNF thread)\u003c\/li\u003e\n\u003cli\u003eMaterial: 6061-T6 billet aluminium\u003c\/li\u003e\n\u003cli\u003eFinish: Hard coat anodised black\u003c\/li\u003e\n\u003cli\u003eThread: 3\/8\"-24 UNF (37° flare)\u003c\/li\u003e\n\u003cli\u003eWeight: Minimal\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePerfect for:\u003c\/strong\u003e Sealing unused brake line ports, fuel line tees, oil line manifolds, and any -3AN female port that needs to be capped off.\u003c\/p\u003e\u003cp\u003ePart number: 820-03-BLK | Australian stock ready to ship.\u003c\/p\u003e","brand":"SS Racetech Rods \u0026 Customs","offers":[{"title":"Default Title","offer_id":49893911986493,"sku":"820-03-BLK","price":5.85,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/files\/820-03-blk-3-flare-capspeedflow-fittingsss-racetech-rods-customs-826064.jpg?v=1742277586"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0508\/8011\/8978\/collections\/0002861_o-ring-plug_450.jpg?v=1776137973","url":"https:\/\/racereadygear.com.au\/collections\/speedflow-plugs-caps-bulkhead-nuts-washers-auto.oembed?page=2","provider":"SS Racetech Rods \u0026 Customs","version":"1.0","type":"link"}